April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|
Knife collection Display with Cherry Frame
Furnished content. (from Lumberjocks.com)
This is my attempt for a way of displaying knifes of 4 to 6 even though I placed some larger ones in for testing. The entire frame is cherry with a 3:4 back board for the knife holding. The over all size is 3 deep and the frame is 20.5 x 27. After I had cut the back board I cut rows of 1/2 strips for the 3/8 magnets epoxied in place – for holding the knifes with a 3/8 dowel for supporting each handle side bracing. (Picture three). I had to ensure that the knife blades faced left so the handle logo showed, a mistake I almost made but caught it before mounting the backboard the frame. The front panel is made of cherry also with plexiglass insert and I finished with Zinser sealer with light sanding.Hope my WWII buddy likes it when presented he has over 80 knifes much more than my small collection that I had to scrap together for the picture shown.The case will hold 28 knifes ….
Read more here
posted at: 12:00am on 20-Jan-2019 path: /Woodworking | permalink
comment...
April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|