home << Woodworking << auto how to mill exposed tenons for drawers with a domino joiner
April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|
How to mill exposed tenons for drawers with a Domino Joiner
Furnished content. (from Lumberjocks.com)
A dovetail alignment jig is used to transfer tails to pins in hand-cut dovetails. The same jig can be used to make dominoed drawers. Here are the basic steps:1 – Secure mating boards to jig (for 6mm dominoes, set depth to 28mm for 3/4” stock)—pretend no mortises in the image 2 – Plunge to mortise in tight setting 3 – Remove side; reset depth to 20mm and mortise face board (endgrain) again 4 – Dry fit 5 – Glue, clamp and check for square 6 – Six new jigs (bases) are ready. Fences will be added.Original use:
Read more here
posted at: 12:00am on 05-Mar-2021 path: /Woodworking | permalink
comment...
home << Woodworking << auto how to mill exposed tenons for drawers with a domino joiner
April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|