February 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
|
|
|
|
Soft Close Drawer Slides
Furnished content. (from WoodNet.net)
Any recommendation on lower cost alternative to Blum? I have only used Blum in the past and have been happy with them, but looking for same/similar functionality at a lower price point and similar quality. Any recommendation would be appreciated. Thank you!
Read more here
posted at: 12:00am on 21-Feb-2024 path: /Woodworking | permalink | edit (requires password)
The Simplest Tapering Jig
Furnished content. (from WoodNet.net)
I'm sure I've shown this before, but I had to cut tapers on some legs today, so I decided to take some photos and show you the simple jig I use. I make these jigs for the task at hand. I don't store them. They take 5 minutes to make from whatever scrap I have. The jig I made today was to cut tapers on 28" long legs, prior to turning. The jig is nothing more than a piece of plywood with a rear stop and a shim that's as wide as the taper you need to cut. These legs taper from 2.4" wide to 1.1", so the shim is 0.65" wide.
Read more here
posted at: 12:00am on 21-Feb-2024 path: /Woodworking | permalink | edit (requires password)
Design question/opinion re entertainment center
Furnished content. (from WoodNet.net)
Joe 1086's thread about making a wall/shelves/TV space for his daughter prompted a thought I've had for some time. I was recently in a Best Buy and 85" TVs seem pretty common and reasonably affordable these days. I build an entertainment center in the late '90s for a 32" CRT tv. Yeah, sucker weighed close to 200 lbs. or more as I recall. Currently it houses a 46" Sony which is quite modest by today's standards. The TV sits on top of a 50 inch base with drawers and shelves with towers in either side. The towers are about 6" deeper than the base. Problem with this design is if I wanted to go with a TV larger than about 50", I couldn't. I could move the base out so it's in front of the towers that contain books and audio video devices. A larger TV would obstruct both towers. Anybody have a thought beyond redesigning/rebuilding at least the center portion?
Read more here
posted at: 12:00am on 21-Feb-2024 path: /Woodworking | permalink | edit (requires password)
February 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
|
|
Promoted by Feed Shark
|
|