May 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|
Phone holders
Furnished content. (from Lumberjocks.com)
Made these phone holders as gifts this year. I made a prototype first out of a 2×4, and it immediately warped, so that gave me the idea of the curved front and back pieces – two points of contact in the front, one in the back – if it warps, it will always be stable.I also made a game-time decision to change the way the two pieces fit together. I originally had a horizontal slot, but with the hole for the phone charger, it made for a really weird looking cut, made the right-side of the phone rest a little flexible, and really sacrificed strength. So instead, I decided on a double notch and double tongue design. It worked great and it's nice and strong, but now the pieces tend to slip a bit. I don't think they'll fall apart, but they don't necessarily seat fully always after using it a few times.On one piece I tried the acetone toner transfer again to put a logo on the back side. This one was by far my first attempt – I think I'm figuring out the best method. Lots of pressure with a flat-tipped stick, and just the right amount of acetone does the trick for me.Finish is a few coats of spray shellac.I made 6 of these in total, 2 maple, 2 cherry, and 2 red oak. The oak ones are my favorite; IMO they have the most character.
Read more here
posted at: 12:00am on 31-Dec-2019 path: /Woodworking | permalink
comment...
May 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|