May 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|
Back Flow Incense Burner/Inside-Out Turning
Furnished content. (from Lumberjocks.com)
I wanted to make another back flow incense burner but not a typical waterfall type so I designed this one like water falling through and arch. First I needed the arch which I made from an inside out turning.Then I turned the floating base with a recess for the arch ( to center it) and which is doweled and glued to the base. After finishing the the wood with many coats of clear matte spray ( to get it to come to a satin sheen), I poured turquoise chips in the bottom and flooded the pool with clear epoxy resin. The base is 5 1/2” round and the whole thing is 7 1/4” high. The last two shots were the raw wood pieces as they came out of the lathe.Below is a video of the burner working. https://www.youtube.com/watch?v=DKsbybw313UCheers, Jim
Read more here
posted at: 12:00am on 30-Jan-2020 path: /Woodworking | permalink
comment...
May 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|