The Woodshop Shed

adventures in woodworking and home maintenance, from my shop in an oversized backyard shed

July 2019
Sun Mon Tue Wed Thu Fri Sat
 
     


Hanging Compressor Project

I saw this pic in a magazine...



... and it got me thinking.

I wanted a dedicated place to finally put my compressor in the shop...
  • while allowing it to be removed quickly to use away from the shop
  • without taking up valuable floor space
  • with an attached 5 gallon tank
  • with a connection to a retractable air hose reel
  • without screwing anything directly to the ceiling (to avoid puncturing the roof shingles, and inviting leaks)
  • and with a copper pipe manifold that has connections before and after an air filter


I ended up with all of these, and more.


Read part two here.



posted at: 9:10am on 18-Jul-2019
path: /Shop_Improvements | permalink | edit (requires password)

Comments:
0 comments, click here to add the first



Hanging Compressor Project, Part 2

In the first post on this project, I said...

I wanted a dedicated place to finally put my compressor in the shop...
  • while allowing it to be removed quickly to use away from the shop
  • without taking up valuable floor space
  • with an attached 5 gallon tank
  • with a connection to a retractable air hose reel
  • without screwing anything directly to the ceiling (to avoid puncturing the roof shingles, and inviting leaks)
  • and with a copper pipe manifold that has connections before and after an air filter


Here's what I to put together...



Now I know it looks sort of busy, and part of that is due to my jam packed shop, but let me go through all the pieces that make up this total compressed air solution, that I am VERY happy with, and maybe when I'm done, it'll inspire you to do something similar.

Let's start with the compressor platform...





You can see the pivoting, 2" PVC coiled hose keeper that's mounted under the platform, the T-fitting I replaced the compressor's release valve with, and even the tilted arm the copper manifold is mounted to, but more on those later. The mirror mounted above the compressor allows me to see the gauges without having to climb up there.

Here's the platform before I hung it up, without anything on it...



I put cleats on three sides, and glued those small, angled cleats in place too.
The compressor's front foot rests in the half-circle drilled into the front cleat, and its back two feet rest in the half-circles drilled into those two angled back cleats.

All the cleats serve to keep the compressor in place, during any vibration while the compressor is running. But as it turns out, there's actually very little vibration, and I think it's because the platform is hanging from chains, and that might dampen most of the vibration, along with the compressor's rubber feet.

The platform is hanging from the angled ceiling joists of my workshop, so it's pretty clear the stainless steel chains had to be shorter in the back than in the front, so as to level the platform.


Part 3 in a few days...



posted at: 9:10am on 18-Jul-2019
path: /Shop_Improvements | permalink | edit (requires password)

Comments:
0 comments, click here to add the first



Rocking chair for balcony

Furnished content.
(from Lumberjocks.com)


Rocking chair for balconyMy first effort at building in cedar. My own design with a nod to Limbert. Keyed-pin tenons for IKEA like assembly and disassembly.



Read more here

posted at: 12:00am on 18-Jul-2019
path: /Woodworking | permalink | edit (requires password)

Comments:
0 comments, click here to add the first



Small limbert inspired table

Furnished content.
(from Lumberjocks.com)


Small limbert inspired tableI made one of these but sold it when moving to a new state and lifestyle. Decided to build another. This time experience helped a great deal.



Read more here

posted at: 12:00am on 18-Jul-2019
path: /Woodworking | permalink | edit (requires password)

Comments:
0 comments, click here to add the first



Another test ring.

Furnished content.
(from Lumberjocks.com)


Another test ring.Not the best picture but here is another test I made practicing to make my best friends wedding ring. Ring is made from walnut, maple and bocote..This was the result of me attempting to make a bentwood ring, gluing my fingers together, having a horrible looking ring that I threw across the room (this was probably my 5th attempt) and said hell with this I'm doing something different tonight…haha



Read more here

posted at: 12:00am on 18-Jul-2019
path: /Woodworking | permalink | edit (requires password)

Comments:
0 comments, click here to add the first



July 2019
Sun Mon Tue Wed Thu Fri Sat
 
     


Promoted by Feed Shark





RSS (site)  RSS (path)

ATOM (site)  ATOM (path)

Categories
 - blog home

 - Announcements  (0)
 - Annoyances  (0)
 - For_Sale  (0)
 - Home_and_Garden  (0)
 - Humor  (0)
 - Industry_News  (1341)
 - Massachusetts_USA  (0)
     - Swansea  (0)
 - Notices  (0)
 - Observations  (0)
 - Oddities  (0)
 - Reading  (0)
     - Books  (0)
     - Ebooks  (0)
     - Magazines  (0)
     - Online_Articles  (0)
 - Reviews  (0)
 - Rhode_Island_USA  (0)
     - Providence  (0)
 - Shop  (0)
 - Shop_Improvements  (2)
 - Woodworking  (3269)
     - Projects  (1)
     - Resources  (3)
     - Techniques  (179)
     - Tips  (0)
     - Videos  (7)


Archives
 -2019  December  (41)
 -2019  November  (89)
 -2019  October  (89)
 -2019  September  (90)
 -2019  August  (92)
 -2019  July  (94)
 -2019  June  (89)
 -2019  May  (97)
 -2019  April  (89)
 -2019  March  (100)
 -2019  February  (93)
 -2019  January  (88)
 -2018  December  (28)


My Sites

 - Millennium3Publishing.com

 - SponsorWorks.net

 - ListBug.com

 - TextEx.net

 - FindAdsHere.com

 - VisitLater.com