| April 2026 |
|---|
| Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
| |
|
|
1 |
2 |
3 |
4 |
| 5 |
6 |
7 |
8 |
9 |
10 |
11 |
| 12 |
13 |
14 |
15 |
16 |
17 |
18 |
| 19 |
20 |
21 |
22 |
23 |
24 |
25 |
| 26 |
27 |
28 |
29 |
30 |
|
|
|
|
Walnut burl veneer - rookie question
Furnished content.
(from WoodNet.net)
Unless you count the adhesive iron on tape, I've never used real wood veneer, but through a series of unfortunate events, I'm now restoring a very old bedroom vanity. This vanity is primarily built of Walnut, with Walnut burl veneer on the drawer fronts, that is chipped, buckled and needs replaced. I've removed the old stuff (hide glue) and need to order replacement veneer and put it on. All the pieces will be about 8"x30". I don't own a vacuum press, or any specialized veneering tools. I don't anticipate this is something I'll do often, and I don't want to buy a vacuum system, but I'm ok with smaller tools and supplies. So questions; Will I need to soften and flatten the wood before using? Is it likely I'll need to patch holes in the veneer? What glue, application method do you recommend?
I know Youtube can be helpful and I'll certainly watch some vids, but I'm hoping for some real people/real world feedback. I haven't bought anything yet, so if there is a recommended source for the burl or materials, I'd appreciate it. Thank you!
Read more here
posted at: 12:00am on 16-Apr-2026
path: /Woodworking | permalink
comment...
| April 2026 |
|---|
| Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
| |
|
|
1 |
2 |
3 |
4 |
| 5 |
6 |
7 |
8 |
9 |
10 |
11 |
| 12 |
13 |
14 |
15 |
16 |
17 |
18 |
| 19 |
20 |
21 |
22 |
23 |
24 |
25 |
| 26 |
27 |
28 |
29 |
30 |
|
|
|
|