The Woodshop Shed

adventures in woodworking and home maintenance, from my shop in a backyard shed

home << Woodworking << auto identificationof tools in a catalog
November 2026
Sun Mon Tue Wed Thu Fri Sat
         

  Basic Search
Search:
Entire Site This Topic Only
Match:
Any All
Partial Whole Words only


identificationof tools in a catalog

Furnished content.
(from WoodNet.net)


I've got a project I'm working on. There are grooves in some of the pieces of the item I'm working on. The grooves extend to the end of the piece and are only 2 to 3 inches in length, not extending to the other end of the piece. I need to deepen the grooves a small amount, and lengthen them about half an inch. The grooves are almost a quarter of an inch, 0.235 inches wide.That pretty much rules out use of a 1/4" chisle I have. Checkikng the width with a metric caliper, I found they're very close to 6mm in width. Went through the list of metric chisles offered by Amazon, and found a set of 4 chisles at an affordable price, and ordered the set. When they arrived, I figured I could proceed with the project, only to discover that the new "6mm" chisle is a quarter of an inch wide, 6.7mm. Checked the other chisles in the set, and they're all standard American widths, although the tools themselves are clearly marked with metric width. Back to the Amazon web site, and discovered listings that had text stating tool as fraction of an inch in width, and pictures of the chisles showing metric markings. And some of the listings are really confusing, showing the width as "6mm - 1/4 inch", leaving one to wonder what the width of the chisle actually is. I tried quering the online help, only to get the advice that if the width is critical I should measure the tool. Big help. So I tried going in person to some potential stores with my measujring device. A potential purchase was marked as to the size, but it was packaged such that it would have to be opened to measure the tool, and not all stores allow that. I finally ended up ordering a mortice chisel from Amazon that clearly states 6mm width in both text and picture. It's due to arrive on Sundy, so I'll fid out then if it's really the tool I need.

.jpg  100_9047.jpg (Size: 745.31 KB / Downloads: 45)

Read more here


posted at: 12:00am on 08-Nov-2026
path: /Woodworking | permalink


0 comment(s)

comment...

 
Name:
URL: (http://... - optional)
Title: (optional)
Comments:
Please enter the anti-spam code shown below: 
home << Woodworking << auto identificationof tools in a catalog

November 2026
Sun Mon Tue Wed Thu Fri Sat
         


  Basic Search
Search:
Entire Site This Topic Only
Match:
Any All
Partial Whole Words only






RSS (site)  RSS (path)

ATOM (site)  ATOM (path)

Categories
 - blog home

 - Announcements  (0)
 - Annoyances  (0)
 - For_Sale  (0)
 - Home_and_Garden  (1)
 - Humor  (0)
 - Industry_News  (0)
 - Massachusetts_USA  (0)
     - Swansea  (0)
 - Notices  (0)
 - Observations  (0)
 - Oddities  (0)
 - Privacy  (1)
 - Reading  (0)
     - Books  (0)
     - Ebooks  (0)
     - Magazines  (0)
     - Online_Articles  (0)
 - Reviews  (1)
 - Rhode_Island_USA  (0)
     - Providence  (0)
 - Shop  (0)
     - Planes  (1)
 - Shop_Improvements  (2)
 - Woodworking  (449)
     - Calculator  (1)
     - Projects  (2)
     - Resources  (3)
     - Techniques  (0)
     - Tips  (0)
     - Videos  (0)


Archives
 -2026  November  (8)
 -2026  October  (11)
 -2026  September  (13)
 -2026  August  (12)
 -2026  July  (12)
 -2026  June  (10)
 -2026  May  (10)
 -2026  April  (12)
 -2026  March  (11)
 -2026  February  (16)
 -2026  January  (15)
 -2025  December  (15)
 -2025  November  (5)
 -2025  October  (17)


My Sites

 - Millennium3Publishing.com

 - SponsorWorks.net

 - ListBug.com

 - TextEx.net

 - FindAdsHere.com

 - VisitLater.com