The Woodshop Shed

H'ep with procedure

Furnished content.
(from WoodNet.net)


One of my winter projects will be to build two saddle-seatcounter-height stools, sorta like this one:

https://www.amazon.com/AmazonBasics-Clas...9650&psc=1

Our counters are 36" high so I am thinking +/-28" height, seat dimensions 12"X16", splayed legs to maybe 14"X18". I have a ton of 5/4 prime straight-grained walnut that will be used, and I want to avoid the battleship-type construction used in most of my projects over 50+ years (no linebackers will ever sit on these!). M&T joints for stretchers and footrests. Maybe a 1/2" "saddle depth" across the width. Finish likely just Danish oil.Questions:

1) How would you fashion the "saddle" for this? My plan is to bandsaw out the general outline and then chisel/scrape/sand to finish-ready. I do not have any of the large-scale carving/shaping tools like a scorpbut have a foam-padPC ROS, a 6X48 belt sander, and a bench spindle sander. One thought is to make a sanding block from one of the bandsaw cutouts.

2) Would you taper the legs, likely to be about 1"X2" finish dimension?

Any other ideas or comments? TIA.

Gary

Read more here

0 comment(s)