I got a request for a Gnome Roof from a very nice lady that found me on a neighborhood Social Media site. I decided to help her and make her a Gnome Roof for a stump in her yard!The stump is Crepe Myrtle (about 12” D. The trunk was not flat so I had to find a way to cut it flat with the only tool I had… an 8” electric “extend it” pole saw trimmer! I can't believe it work so well on a somewhat hard wood! . In this photo you can see the slice i cut off on the right. .I had to come up with a way to make a level cut line around the stump so I made this jig and used my level to make marks all around the trunk. Then I connected the dots!I used my pole saw to make the cutout for the KEY. Lot's of gouging and chiseling! It has to be level sitting in the cavity. . I made a KEY that mounts on in the center of the trunk. After I set the roof on the KEY a 1/4 turn on the roof and it locks the roof in place. .
.
.
. .
. She just sent me this night shot! Very nice! She said I'll get updated photos after she get all the village built!