May 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|
A few shop aids
Furnished content. (from Lumberjocks.com)
#1- bench riser. Basically three boards, clamps in vise to bring detail work to a non-stooping height. Clamp board in vise, standing on rails, cut level to desired height. Stand second board on bench, cut level to height of #1, fasten. Fasten on top. It will even take a little pounding directly over the supports.#2 Vise table. This gives a flat surface in a cluttered area. Clamp a stick in vise, glue on a board. I had to add a filler later to have the vise handle in a good position.#3 Blower. I believe this was for inflating air beds. Hose is I think used for outdoor fountains- about 1” diameter. Random vacuum crevice tool taped on. Blows a moderate air stream that works well to clean the dust & shavings off the bench, chopsaw, etc. etc. without unduly raising a cloud of dust.#4 Not a shop aid, more comic relief. Went to get a couple of free foundation jacks listed on Craigslist. Expecting something like in the foreground to add to my collection, but they were these behemoths- this is the lighter one & it weighs 50 lbs.
Read more here
posted at: 12:00am on 04-Sep-2022 path: /Woodworking | permalink
comment...
May 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|