Layout Tools
Furnished content.
(from Lumberjocks.com)
 Been making some more Layout Tools. Small Square, Bevel Gauge, Marking Knifes, and Awl's. Most are made with Walnut, and Purpleheart endcaps. The blades for the bevel gauge and marking knife were ordered through Taylor Tools.The finish was 2 coats of Natural Danish Oil, and 6 coats of Shellac sanded with 220, 400 and finally 0000 Wool and buffed. The Awl's were finished on the lathe with a friction polish of Shellac an BLO.I made these up to have on hand to give to a few buddies. This is a great site, and many thanks to all who have helped out with comments.Thanks for viewing and comments always welcome.
Read more here
posted at: 12:00am on 13-Jun-2022
path: /Woodworking | permalink | edit (requires password)
cherry gall pens
Furnished content.
(from Lumberjocks.com)
 just a couple of manhattan pens i made from some beautiful cherry gall that my good friend van was kind enough to sell me some.it's a simple pen kit to make and the wood turned very easy.i just did a simple mylands friction polish.i know most do ca finish but i just dont care for the look of it.if i wanna turn plastic ill use that.the pens are laying on a piece of the gall.
Read more here
posted at: 12:00am on 13-Jun-2022
path: /Woodworking | permalink | edit (requires password)
dovetailed white oak tool box
Furnished content.
(from Lumberjocks.com)
 Tried my hand at making a variation of the Matt Estlea dovetailed toolbox. Opted for two drawers at the bottom and a lift-off lid rather than hinged. All hand tools. A bunch of mistakes and some shortcuts I would not do over. But I learned a lot, and it is good enough for my shop, certainly. White oak, which is an insanely hard wood to work by hand. Maple drawer sides and bottoms.
Read more here
posted at: 12:00am on 13-Jun-2022
path: /Woodworking | permalink | edit (requires password)
Promoted by Feed Shark
|
|