The Woodshop Shed

BARREL BOTTLE OPENER

Furnished content.
(from Lumberjocks.com)


Another bunch of wall hang bottle openers – BARREL alike, made of scrap wood ash, temperature treated ash (cross beams), oak, walnut and plywood for cups. Finish wood oil. Dimensions 30×13cm, 13mm thick.

Comments:
0 comments, click here to add the first

Not Just Cats & Dogs, Furniture Rescues Need Considerations Too

Furnished content.
(from Lumberjocks.com)


This poor creature, which belonged to a lady's late grandmother, jumped from the back of a pickup. It suffered broken bones, scraps and even had a part missing from the ordeal.I took my shot, and I think it's ready to get back home.I think the part I'm most tickled with is, the chip repair on the face. That I was able to pull it off is thanks to, in part, flooring an neighbor was tossing during a move.Though it doesn't show, if I wanted to “more invisible” the chip, I should have taken it down to the router line.I cleaned the chip out, shaping it to a V. Before I did, I confess to, foolishly, thinking a butt joint would work. IO was well into an epoxy glue up when I screamed [to myself] “hell no,” and pulled it, then came back and V'd the cut.The grain isn't real, at the top of the V. It's Exacto work, which the stain turned into grain.

Comments:
0 comments, click here to add the first

6 plates with apricot segments.

Furnished content.
(from Lumberjocks.com)


Hello, friends. I had some free time, and I decided to make some plates. For this, I used the material of ash and oak for the base of the slabs. I made segments with apricot and bog oak. In the end, I soaked everything with oil wax. Here is a link to the video production.
https://www.youtube.com/watch?v=UynLDE6ajAw&t=13s

Comments:
0 comments, click here to add the first