Burr in Blue
Furnished content. (from Lumberjocks.com)
Chestnut burr I have been working on. Stained with spirit stains and a gloss finish the edge is guilded with a chemically treated brass leaf giving the edge a brass copper look some little parts show the natural edge through the guilding adding to the piece Measures 4” tall and 7 1/2” diameter
Read more here
posted at: 12:00am on 22-May-2020 path: /Woodworking | permalink | edit (requires password)
Spend/Save/Give Jars box
Furnished content. (from Lumberjocks.com)
This box is inspired by a similar design bought at a hobby store. My Sister-in-law sent me the picture, of the box she bought for $10 (last picture).It's made out of pine, 4×5x14 are the approximate dimensions. I used 1/4 birch plywood for the base of the box set in 1/2 inch in from the bottom of the rails. Dark walnut stain, and 2 coats of polyurethane.Each box has 3 jars for my nieces and nephew to save money, spend money, and give money to their church or donation. The jars are wide mouth Mason type jars.I don't know the exact naming of the jointery i used, bit it was not actual straight up edge to edge box joints. I used a dado on the edges of the same depth of the sides. Everything is glued and nailed, ans the birch plywood base is floating in the rails similar to a drawer.
Read more here
posted at: 12:00am on 22-May-2020 path: /Woodworking | permalink | edit (requires password)
Business Card Holder and Case
Furnished content. (from Lumberjocks.com)
Business card holder and filing box, made for my son. Used the Incra hinge maker, and routre table for the “dovetail” joinery. The re-sawing of the dividers on the bandsaw.
Read more here
posted at: 12:00am on 22-May-2020 path: /Woodworking | permalink | edit (requires password)
Promoted by Feed Shark
|
|