This End Grain Cutting Board did not turn out quite the way I had planned. After the glue up twice over, I was rounding the board's edges on my router (which helps with tear out on the ends) and the router bit caught the board and took a chunk out of it..(Laziness and a dull bit) caused this boo boo. The board was layed out for a 13 1/2 x 21 board. After trimming, it finished out at 12x 21. Walnut, Flaming Birch and White Ash were the woods I used. Enjoy
Added a Cheese and Crackers tray to our collection today made from black walnut and birch. The tray measures 12 L x 10 W x 1 D. Finished the tray with three coats of mineral oil followed by rubbing in a coat of beeswax and orange oil for a foodsafe finish.
Request from the Boss, small plant stand made from some left over Walnut and Oak scraps, except for the top which is Walnut 4/4 slab of Walnut Burl from another project. Oak side rails added after the original walnut ones failed during construction, mortises cracked. About 9” x 14” and 15” tall, finished with OSMOS hardwax and a coat of Fiddlers paste wax on the top.