| October 2026 |
|---|
| Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
| |
|
|
|
1 |
2 |
3 |
| 4 |
5 |
6 |
7 |
8 |
9 |
10 |
| 11 |
12 |
13 |
14 |
15 |
16 |
17 |
| 18 |
19 |
20 |
21 |
22 |
23 |
24 |
| 25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
Help with Norm's Router Station
Furnished content.
(from WoodNet.net)
I've already made some minor errors. Such as when applying the drawer cleats I failed to apply glue and didn't realize it until after I glued the sides on. I was able to correct that error. The vertical interior panels are 1/8' higher than they should be. But I can correct that by making slight dados in the bottom of the top to deal with that FUPA. Fortunately, I haven't glued on the edge trimming yet.
My major concern is cutting and dadoing the cut out for the router lift plate. I can make the template for the recessed dado for the thickness of the plate but I don't want to make any further goofs. Any and all suggestions are welcome. Like what mistakes not to make, etc.
Jim
Read more here
posted at: 12:00am on 13-Oct-2026
path: /Woodworking | permalink
comment...
| October 2026 |
|---|
| Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
| |
|
|
|
1 |
2 |
3 |
| 4 |
5 |
6 |
7 |
8 |
9 |
10 |
| 11 |
12 |
13 |
14 |
15 |
16 |
17 |
| 18 |
19 |
20 |
21 |
22 |
23 |
24 |
| 25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|