| December 2025 |
|---|
| Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
| |
1 |
2 |
3 |
4 |
5 |
6 |
| 7 |
8 |
9 |
10 |
11 |
12 |
13 |
| 14 |
15 |
16 |
17 |
18 |
19 |
20 |
| 21 |
22 |
23 |
24 |
25 |
26 |
27 |
| 28 |
29 |
30 |
31 |
|
|
|
|
|
Woops
Furnished content.
(from WoodNet.net)
Need help correcting a goof
I cut 4 narrow dado grooves to receive the Rocker sliding door track. Unfortunately I now have the entire cabinet assembled and glued up and the dados are too narrow. I can't really fit a router in there to widen them, plus I'm concerned I might damage the whole piece using power tools at this point. I tried a flat file but it didn't remove much material at all. I'm considering the very tedious process of using a dremel.
Thsnks, any ideas to make this process less tedious.are welcome. And yes I know this was dumb I should have measured the grooves with a caliper.
Read more here
posted at: 12:00am on 16-Mar-2024
path: /Woodworking | permalink
comment...
| December 2025 |
|---|
| Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
| |
1 |
2 |
3 |
4 |
5 |
6 |
| 7 |
8 |
9 |
10 |
11 |
12 |
13 |
| 14 |
15 |
16 |
17 |
18 |
19 |
20 |
| 21 |
22 |
23 |
24 |
25 |
26 |
27 |
| 28 |
29 |
30 |
31 |
|
|
|
|
|