May 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|
Thin strips on Festool CMS tablesaw jigs
Furnished content. (from Lumberjocks.com)
Thin strips on Festool CMS tablesaw jigsHere two thin strip jigs I made yesterday, specifically made for my Festool CMS table saw.They are made from standard aluminium profiles, these happens to fit the CMS, so I just cut into the profiles with the table saw and attached the ball bearings with bolts, that I sanded down in height of the heads.So simple and fast to make, just ball bearings, profiles, washers, bolts and nuts . ;-)You can see my other strip jigs, the thin strippers as I called them here: https://www.lumberjocks.com/mafe/blog/129568 Pictures: 1. Strip jig 1 on the Festool CMS table saw. 2. Top close up on version 1 ball bearing. 3. Side close up on version 1 ball bearing. 4. Strip jig 2 on the Festool CMS table saw. 5. Side close up on version 2 ball bearings. 6. Side close up on version 2 ball bearings.
Hope it can be to some inspiration, perhaps even a thin strip jig.Best thoughts,MaFe
Read more here
posted at: 12:00am on 16-May-2019 path: /Woodworking | permalink
comment...
May 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|