April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|
Lathe and Buffer Stand
Furnished content. (from Lumberjocks.com)
I sold my 15×38 Craftsman lathe ( with the shelves under it) last weekend so I lost the machine I did my buffing on and also the storage for so many of the accessories for my Nova lathe. I decided to make a storage cabinet for all that stuff plus have a place to mount my HF mini lathe on and set it up for pens. I had this Grizzly knife buffer in my way on my regular workbench so I mounted it on the back of the stand for buffing. I have an adapter on it to accept my Beall buffing system.The cabinet is 19” x 31” x 36” high. It is made from plywood I had laying around and a laminate covered Steelcase top . I just had to buy the hinges and the casters. I put a shot of the caster that I bought on E bay.They are 3” and lock the wheel and the swivel with the one lever.I put a long cord on it and mounted 2 duplex outlets so I can plug in both machines and 2 other things if needed. I add 3 cord spools on it to keep the cords managed and out of the way. The doors have 4 – 10mm magnets mounted in them for closure. It is finished with gray latex enamel!Cheers, Jim
Read more here
posted at: 12:01am on 19-May-2019 path: /Woodworking | permalink
comment...
April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|