The Woodshop Shed

End Grain Cutting Boards

Furnished content.
(from Lumberjocks.com)


I recently completed by first ever cutting boards. These were both made as gifts for two different weddings. They were both made with a combination of walnut, cherry, and hard maple. As these were my first cutting boards, I need some help coming up with design ideas. So, I experimented with several different designs using CBdesigner before settling on these.I used a combination of power and hand tools to complete these. As I don't have access to a planer, the most time consuming parts were flattening the boards after the first and second glue up. After the first glue up, I did all the flattening with a smoothing plane. Thankfully, I was able to use the end mill at my office to flatten the end grain after the second glue up. On the first board, I used a 3/4” straight bit which still took a really long time. When it was time to make the second board, I bit the bullet and ordered a 2” Whiteside spoilboard bit which made things go much much quicker. After a lot of sanding, I finished these with mineral oil applied daily for the first week. Final thickness ended up being ~1.5” with overall rough dimensions of 11” x 14”.These were a lot of fun to make, and hopefully they'll get a lot of use from the new families who received them. I got a lot of inspiration from all the other LJ cutting boards, so thank you!

0 comment(s)