March 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|
|
|
|
|
|
AV credenza
Furnished content. (from Lumberjocks.com)
Hi everyone, I just finished a credenza to host all AV equipment below the TV and hide the gazillion cables.The box is made of bubinga with variable space box joints I cut for the fist time on the CNC.The doors are birds eye maple and carved on the CNC as well. The process was very smooth, I first struggle to create the CAM for this pattern in Fusion360 so if anyone is interested I can share the process.The base I welded out of 304 stainless steel and since I cut the angles of the legs on my Tormach I ended up engraving a logo as well.I used for the first time European hinges (by Blum) and highly recommend them – the setup couldn't be easier and the ability to adjust after install is fantastic.The finish is my usual 2 coats of shellac followed by 4 coats of water based poly with ample sanding in between coats.Thanks for looking and have a great day
Read more here
posted at: 12:00am on 25-May-2020 path: /Woodworking | permalink
comment...
March 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|
|
|
|
|
|