The Woodshop Shed

Mjllnir

Furnished content.
(from Lumberjocks.com)


Mjllnir, Thor's Hammer.Woods: Maple, Spanish Cedar and Ash.Finish: Danish Oil.

Comments:
0 comments, click here to add the first

Kalimba #3

Furnished content.
(from Lumberjocks.com)


I think I hit on a good combination of wood and thicknesses for this one. The main wood is maple (paduk marquetry). The back is 1/4” thick and the top is about 2mm. Sorry for the mixed measurements, but that's just how I do things.

Comments:
0 comments, click here to add the first

Frame & Panel Chest, in Spalted Maple

Furnished content.
(from Lumberjocks.com)


Standing about 17” tall, box is 36 by 17”, more or less. Frame and Raised panel construction…Panels sit in grooves.Corner posts are a 2 piece glue up….with a Tongue & Groove joint…made to look the same 3” width in either direction. Lid is a single glued up, raised panel, sitting in a frame's grooves….Corners of the lid have half blind dovetails3 “cup” handles…one on each end, and one for the lidStain is Witch's Brew..followed by 2 coats of Amber Shellac, then one coat of Clear Gloss Poly. There are plastic, nail on pads for the feet. Bottom is a 1/4” Luann plywood panel…sitting on 1×1 Maple cleats..About 5 weeks to complete…there is a Blog on the build….”A Project for June”?Thanks for looking in!

Comments:
0 comments, click here to add the first

Double Duty Peg-Blocks

Furnished content.
(from Popularwoodworking.com)


I needed a way to lift pieces off the surface of my bench for finishing, so I made some 3/4″ x 2″ x 3″ blocks and inserted 1/4″ x 1-1/4″ dowels into them. Here's the bonus: I discovered that if …Source

Read more here

Comments:
0 comments, click here to add the first