Furnished content.
(from Lumberjocks.com)
So I wanted a negative rake lathe tool for turning acrylics and really hard wood, They're like $80-$125+ but you can buy a replacement cutter for $15-$20… I'm not cheap when it comes to buy tools but what makes the handle worth all that money? So I bought a cutter and shaped the tip of a 3/8” stainless rod on the grinder, Drilled and tapped it and screwed the cutter on. Then I turned a mahogany handle on my lathe with a tenon for a band and drilled it out. For a band I used a 1/2” brass adapter that I put in the metal lathe, Cut off the male end and drilled it out for the stainless steel. I used JB Weld 5 minute epoxy to put it all together. To see if it was worth it I timed myself… It took me less than 45 minutes. I'm calling it a win… Oh.., And there's a cigar style pen I made from a Jameson whiskey barrel stave and the top I printed the label and cast it in resin.