Mirror frame
Furnished content.
(from Lumberjocks.com)
Hi:Today I started a new project… a carved mirror frame for my grand daughter.
It will be 20” x 26” in 8/4 hard white birch. The panel was left unglued along the central joint, and then the pattern was traced onto the panel.Next the bandsaw was used on both the inside and outside of the frame to trim it to the line. When this was done, the two halves of the panel were glued together. Now it will be ready for the carving process.Will keep you posted.
edit: Woodworking/auto___mirror_frame.wikieditish...