Furnished content.
(from Lumberjocks.com)
Hey Lumberjocks, This is a work in progress. My first real venture in to something above garage cabinets. I decided to rip out old particleboard laundry sink cabinet and replace it with a custom made cabinet. I chose Birch for the 1/2” plywood carcasses and Birch for the cabinet face and door trim.Following the same construction method, the larger cabinet, top and bottom, was installed in to a small cubby and will provide tons of storage as there was nothing there. The doors and drawers insets are also Birch, but a lesser grade and they do not show as well. Should have went with the 1/2” Birch for the insets as well. Next time.I used all soft-close hardware and BLO oil on everything except the door/drawer insets. Applied wipe-on Poly U to everything and steel wool between 2-3 coats. Next up cabinets on the opposite wall. PS this room will get a full set of door trim, baseboard and crown molding when I'm done with the construction.
Thx
Greg