Furnished content.
(from Lumberjocks.com)
Hi all,Been awhile since I have posted anything, but just finished one of the largest pieces that I have built. This is an executive desk for my home office. Overall dimensions are 66 wide, 34 deep and 31 tall. It Breaks down into 4 major pieces. The top, the 2 banks of drawers and the middle panel that joins the 2 banks of drawers.Constructed from SYP 2×12s from HD, the legs are 2x2 with a cove cut on outside corners for visual interest and a 1/8 round over. All other pieces are 7/8 with the same round over. The bottom stretchers all have a curve that was drawn with a shop made drawing bow and cut on the bandsaw. I faired the curves with a spokeshave and sanding. The carcasses are assembled with mortise and tenon joinery. I got lazy on the drawers, and I assembled them with 1/2 ply and butt joints screwed together. The drawer fronts are 7/8 with a 1/2 round over and a rabbetted bottom.The carcasses have 3/8 panels that are are set into frames. All drawer slides are wooden and shop made. I sanded everything to 220 and stained with Minwax Red Oak. The finish is Minwax Satin poly. Mixed 1/2 & 1/2 with mineral spirits. Wiped on with t-shirt scraps. 5 coats with a light 0000 steel wool sanding between each.I have a lot of pics. I am going to add them below.
Thanks for looking!