Furnished content.
(from Lumberjocks.com)
Thought you might like to see this cabinet I've just made. The doors are Bubinga and figured Sycamore Veneer and the cabinet outside is Bubinga veneer, all the inside is crown cut Sycamore veneer. I used solid Bubinga to edge the doors and for the base. The doors were the hardest part to do and took quiet a while to cut all the pieces, when it was ready it was all glued down to 18mm MR MDF ( moisture resistant) in a vacuum bag press. For a finish I used several coats of spray lacquer and then rubbed on some beeswax polish using 0000 steel wool and buffed it off leaving a nice finish that's not too glossy.Thanks
Alan