Furnished content.
(from Lumberjocks.com)
Daughter ask for a yarn box for large skeins of yarn she uses in some projects. Ambrosia Maple per her choice. Box is 9” X 7” X 7”. 3/8” thick wood. Bottom is 1/8” Baltic Birch ply. Used a staggered box joint for the corners. 5 coats of wipe on poly. Cured then buffed and waxed and buffed again. Nothing original here looked on LJs postings for ideas. Did use the laser to engrave the yarn balls on the ends. The upper two holes in the end pieces is to insert the knitting needles between knit sessions. The needles then stick into the skein in the box keeping all in place.