March 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|
|
|
|
|
|
Wooden Tools
Furnished content. (from Lumberjocks.com)
These tools were made out of necessity. I forgot my collets for the lathe so I needed to mount my buffing wheels away from the chuck or the head stock so I made this mesquite mandrel to mount the wheels in. I first turned the #2 Morse taper and did the fitting in the tail stock. Then I mounted it in the spindle and bored the 1/4” hole and tapped a hole for a set screw. It works just great .The second tool is a wooden sanding ball where I put a piece of sandpaper over the end and hold it on with a rubber O-ring. I needed this for some spoons I'm making. I have to make some more of them with a 1/8” arbor for a Dremel. but I may need the metal lathe for that. This was also made from Mesquite.Cheers, Jim
Read more here
posted at: 12:00am on 24-Dec-2020 path: /Woodworking | permalink
comment...
March 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|
|
|
|
|
|