April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|
Wavy Flag
Furnished content. (from Lumberjocks.com)
Wavy flag. I pre mill 2x pine material to 1-1/4x1-3/4 x 32 long. I then bandsaw the waves onto each piece, staggering my jig 3/4 on every piece. I then screw the pieces together and with a variety of carbide and sanding heads in my angle grinder. I shape the undulating look of the flag. I will finish sand the piece then mark off the union. Next it is disassembled and stained and charred. I now reassemble, using glue and also clamping to insure tight joints. Next I carve the stars of the union. For this I use a flexible shaft on a Dremel. When the stars are done, I will hit them with a torch to give them a charred look. 3 coats of spar urethane and it is ready for display!
Read more here
posted at: 12:00am on 23-Dec-2021 path: /Woodworking | permalink
comment...
April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|