April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|
Vertical Holding Jig for Tablesaw
Furnished content. (from Lumberjocks.com)
This is a jig I made tonight to be able to safely and accurately slot the ends of some long vertical pieces. I had no other way to hold them safely. This could be a tenon jig too. I was given a big cast iron tenon jig but it did not fit my tablesaw so I gave it back. This was made along those lines only I used maple plywood for the bulk to clamp to.It is made from 1/2” and 5/8” maple plywood and doweled and screwed and glued together. It is 4” wide x 8” long and 6” high with a vertical rail to insure the piece is held square. I left a 1/4” lip on the bottom for the piece to sit on so the edge is never dragged across the top of the saw. It rides totally on the jig like a sled!The only finish on it is wax on the bottom and side. It worked good to put the 1/4” slots in the pieces of the next project. It held the parts real well and I felt comfortable using it that way.Cheers, Jim
Read more here
posted at: 12:00am on 18-Jun-2019 path: /Woodworking | permalink
comment...
April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|