Furnished content.
(from Lumberjocks.com)
Again caught in the Shop Shed and small Space. Thank goodness for saving scrap particle board from cabinets, bolts and parts from the trash day clean up. Some paint I had, and Past experience since this is my second router table top made from this plan. The insert I had saved. Cheap plexi glass will warp. This is the Harbor Freight 2 hp I bought for about $50 with 1/4 and 1/2 collets. I reinforced with blocks the recess since it left only a 1/4 inch and you see a 2×3 frame for the underside. I added 3/4 boards at the edge for extra since my plan uses bolts and wood blocks to clamp the fence, even if you use another clamp I would reinforce the edge. This was 5/8 particle board from cabinets spray painted 4 coats of black and a coat of paste wax. The fence boards are particle board and I made the slots for screws…really nasty to slot particle board but its solid. And the small notch for sawdust. the top is 28 by 16. The mobile base I made 24 by 24 and had blocks to bring it up 7 inches and the old casters were just extra. as were the edge boards. you can find this idea on utube. In my 8×16 shed I needed the mobile base. A pvc dust pipe will be added to the fence.thanks. Hal