Furnished content.
(from Lumberjocks.com)
Mulberry and Walnut lidded box … about 3” tall and 2” in diameter, finished with Tried & True Original.This is actually an practice piece for a new end-grain hollower I put together. The cutter for the tool is actually a 3/8” 2 flute HSS ball nose double end mill ($6.25 + S&H on Amazon). I drilled a 3/8” hole in a piece of 12” long, 5/8” rod from the big box, drilled & tapped for a set screw. I use in one of my 5/8” handles.This tool can be very aggressive (mother of all catches!), but can also produce finish cuts that require little or no sanding. It is for end-grain ONLY, and would be deadly on side-grain turnings.