How to mill exposed tenons for drawers with a Domino Joiner
Furnished content.
(from Lumberjocks.com)
A dovetail alignment jig is used to transfer tails to pins in hand-cut dovetails. The same jig can be used to make dominoed drawers. Here are the basic steps:1 – Secure mating boards to jig (for 6mm dominoes, set depth to 28mm for 3/4” stock)—pretend no mortises in the image
2 – Plunge to mortise in tight setting
3 – Remove side; reset depth to 20mm and mortise face board (endgrain) again
4 – Dry fit
5 – Glue, clamp and check for square
6 – Six new jigs (bases) are ready. Fences will be added.Original use:
edit: Woodworking/auto___how_to_mill_exposed_tenons_for_drawers_with_a_domino_joiner.wikieditish...