Furnished content.
(from Lumberjocks.com)
Made this “Go-Bar Deck” for glueing and clamping ukulele parts and pieces. It sure beats stacking up a lot of weights or messing with a lot of clamps. It also works with the radius dish – shown in the last project – to put a little curvature into the braced tops and backs. The bars are made from straight-grained maple with a 3/16” x 3/8” cross section. The bars worked well when left 1/2”-3/4” longer than the clear distance to the upper deck. The deck is roughly 2 feet square and 2 feet tall.