home << Woodworking << auto french cleat holder for dedusting remote controls
April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|
French Cleat Holder for Dedusting Remote Controls
Furnished content. (from Lumberjocks.com)
I wanted to make a holder for both a new SuperMax (Laguna) air filtration unit, as well as a holder for the controller to the pre-existing cyclone dedusting system that takes care of my tools.The Supermax's remote control needs to have a line of sight (IR) to control the unit, whereas the cyclone dedusting is radio controlled and therefore can be left inside the French Cleat holder when turning the unit on/off. I just made a hole in the front and rounded it over with a router so I can depress the button and see the red led light.At first I was going to have the two remotes arranged side by side, but then I decided to stack the two units on top of each other to decrease the space used on the French Cleat. I finished the remote holder with a coat of Danish Oil.I wanted to get this project done quickly before I lost thetwo remotes forever in a pile of debris. The pics show the end result and I hope this post is a usefulidea for someone looking to do something similar for their remotes.I can't give a review on the SuperMax as I haven't used it too much, but so far I think it's working well, it's pretty quiet and can move the air in the shop at 3 different speeds.
Read more here
posted at: 12:00am on 07-Jan-2021 path: /Woodworking | permalink
comment...
home << Woodworking << auto french cleat holder for dedusting remote controls
April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|