The Woodshop Shed

Easy to build BELT SANDING UNIT now has a base, VIDEO

Furnished content.
(from Lumberjocks.com)


Have been spending quite abit of time getting this project up and running. I first featured the sanding unit attached to the wood lathe some time ago. I have found this sanding unit my most used sanding station.
http://lumberjocks.com/projects/377625 and You tube demonstration https://www.youtube.com/watch?v=6QD1LZKvDLcAfter the prototype I made another one to document the construction of the sanding unit. This sanding unit is SUPER EASY TO BUILD, the tracking is SUPER EASY, and it is SUPER NICE to use, so I have named it my SUPER BELT SANDER. I finally got all the footage edited and made into two videos and uploaded them yesterday. They are:Part 1 https://www.youtube.com/watch?v=i423gw6NHoQ&t=11s
Part 2 https://www.youtube.com/watch?v=uggb_9YtERc&t=1sI also worked on mounting the second one in its own cabinet and motor. This is completely explained and assembled in this video.
https://www.youtube.com/watch?v=SsyN0U6yhXo&t=5sI will include in this post pictures of the cabinet as I assembled it. Very simple to build, compact and works well.
This unit was designed as I went along, solving problems as need arised. I am happy with the result.Motor mounted on a plank with switchPulley side attachedBelt tightening mechanismPut together dust collection boxScrew sanding unit to the top of the backUse four screws to attach the front. This can be taken on and off to change the sanding belt.Do not forget and belt guard, and then make some dust hoods,Whether you power this sanding unit with your lathe or its own motor, you will find it one of your most used machines. What makes the sanding unit so easy to make is because of the sanding belt tightening and tracking method. The front roller has the bearings mounted in the roller. No complicated tightening and tracking mechanism. Slower speeds make it quiet and easy to use.Thanks for looking and comments appreciated.Need to start another project when it warms up, have had a few days down to Minus 30 Centigrade, and the shop is not warming up enough to get my blood flowing. At least I got the computer work done in the house.

0 comment(s)