The Woodshop Shed

adventures in woodworking and home maintenance, from my shop in a backyard shed

home << Woodworking << auto challenging little miter box
March 2024
Sun Mon Tue Wed Thu Fri Sat
         
           


Challenging little miter box

Furnished content.
(from Lumberjocks.com)


Challenging little miter boxThis little nightmare was reclaimed from an old and cheaply constructed coffee table my girlfriend had. It was the first piece of furniture she bought when she graduated college and got a teaching job. She is a very sentimental type of person so she wanted to keep it for something even if we re-purposed it. Her cat scratched it all to hell so we turned the bulk of the coffee table into a large cat tree. The rest I turned into a small jewelry/keep sake box for her.I had absolutely no plan for this thing. I just noticed one day that i had enough of that table scrap left over to make a small box. The grain on all four sides had to be vertical in order to make it though. I figured ok thats not a bad challenge I can do that. Well then all hell broke loose. The panels I was cutting down for the sides have reversing grain. One of the miter cuts went thru sap wood that was still sticky and the glue joint broke. From there it just kept getting worse. All of the walnut you see is there to hide some ugly. Whether it be knots or other defects in the wood…and some in the workmanship. The two walnut inlays on the face of the box were hand cut with chisels after it was assembled because i ran into it with a hand plane and dinged it…that was all me just being stupid.The felt lining is a simple 1/4 in sheet of plywood cut 1/16th smaller than the bottom and wrapped in felt. If she ever wants to change the color i can pry that back out and make a new one.There were a few firsts for me on this project. I had never done splines before so made a jig to do those. I had never used a router table before and did the coving and most of the round over work on the table. The over arm pin router came in handy there. Screw changing router bits. Put the big coving bit in the bottom router and the round over bit in the top router and just raise lower as needed. The splined corners of the box i rounded over with a 9-1/2 block plane. That pine was just too brittle to hold a crisp clean edge.I think that's it for this one. Not super happy with how it turned out but she loves it so that's what counts. And i learned a lot of things NOT to do next time around.



Read more here

posted at: 12:00am on 08-Jan-2020
path: /Woodworking | permalink


0 comment(s)

comment...

 
Name:
URL: (http://... - optional)
Title: (optional)
Comments:
Please enter the anti-spam code shown below: 
home << Woodworking << auto challenging little miter box

March 2024
Sun Mon Tue Wed Thu Fri Sat
         
           







RSS (site)  RSS (path)

ATOM (site)  ATOM (path)

Categories
 - blog home

 - Announcements  (0)
 - Annoyances  (0)
 - For_Sale  (0)
 - Home_and_Garden  (1)
 - Humor  (0)
 - Industry_News  (0)
 - Massachusetts_USA  (0)
     - Swansea  (0)
 - Notices  (0)
 - Observations  (0)
 - Oddities  (0)
 - Privacy  (1)
 - Reading  (0)
     - Books  (0)
     - Ebooks  (0)
     - Magazines  (0)
     - Online_Articles  (0)
 - Reviews  (1)
 - Rhode_Island_USA  (0)
     - Providence  (0)
 - Shop  (0)
     - Planes  (1)
 - Shop_Improvements  (2)
 - Woodworking  (6876)
     - Calculator  (1)
     - Projects  (2)
     - Resources  (3)
     - Techniques  (179)
     - Tips  (0)
     - Videos  (7)


Archives
 -2024  March  (13)
 -2024  February  (15)
 -2024  January  (22)
 -2022  October  (2)
 -2022  September  (86)
 -2022  August  (116)
 -2022  July  (112)
 -2022  June  (117)
 -2022  May  (122)
 -2022  April  (128)
 -2022  March  (140)
 -2022  February  (122)
 -2022  January  (126)
 -2021  December  (132)


My Sites

 - Millennium3Publishing.com

 - SponsorWorks.net

 - ListBug.com

 - TextEx.net

 - FindAdsHere.com

 - VisitLater.com