April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|
Bread sized cutting board
Furnished content. (from Lumberjocks.com)
Made a couple of smaller bread board size cutting boards for my wife's clients as gifts. They are about 8.5” x 15” and 1-1/8” thick. Maple, Walnut, and Cherry. She'll add a bread knife and gift card for “bread” to complete the set.Also I created the top to be quarter-sawn material, with flat sawn sides. In my opinion the only way to make “edge grain” cutting boards larger than 5” wide, 9” long, and 5/8” thick. It reduces the problems of expansion/contraction and glue joint failure.I'm in between a larger project that has stalled because of scope changes, so I took some time to do these in about 5 hours including wood selection, cutting (bandsaw/tablesaw), glue-up, planing, sanding and router. Sanded to 220 grit (lifted grain before final sanding) and then used a 000 scotch pad to final rub the finish. Butcher block mineral oil and bees wax finish, and silicone feet I sourced from “cuttingboardfeet.com”. These are the best cutting board feet I have found since they don't break down like rubber with oils over time. I suppose this could be used for cheese too.My first cutting board (walnut/maple) was in high school 42+ years ago and my sister is still using it nearly daily.
Read more here
posted at: 12:00am on 21-Jun-2019 path: /Woodworking | permalink
comment...
April 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
|