March 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|
|
|
|
|
|
Another TS Box Joint Jig
Furnished content. (from Lumberjocks.com)
Finally built a new Box Joint Jig for the new/used table saw I purchased this past year. Nothing fancy, base is 24” x 12” the jig was made from cabinet grade 3/4” plywood scraps form the job site, and oak runners. Dado cut is set for 1/4”I made a couple of other boards to make box joints in either hexagon and octogon. All board faces have a strip of 150 grit paper glued in place to help with a grip.Planning on making a few more, one for 1/2” joints and one for 3/4” joints.These should come in handy making small boxes, and with multiple sides that I like to make.Also cut out a few zero clearance plates from 1/8” plywood.
Read more here
posted at: 12:00am on 21-Nov-2021 path: /Woodworking | permalink
comment...
March 2024 |
Sun |
Mon |
Tue |
Wed |
Thu |
Fri |
Sat |
|
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|
|
|
|
|
|