Furnished content.
(from Lumberjocks.com)
This is a project I worked on last year during the lock down, but the location i was going to put it was being used as a paint booth so it was stowed away until today. It's an adjustable height jewelers bench from 34” to 41” tall. I used a surplus Dynalift hydraulic table lift and re-plumbed it with 3/16 copper brake lines instead of the plastic tubing it came with so I could make the tight bends and hide all the lines inside the upper 1”x2”channel iron frame. The frame is constructed from 2×2 square tube steel with 1”x2” steel channel cross pieces. the cabinet is 3/4” prefinished Maple ply that I edge banded all the raw edges. This was the first time I had done that much edge banding what a pain. The top is 1 1/2” x 27” x 60” birch butcher block. I have some additional pics of the bench pin clamp and the lower drawers which have various tool holders that mount on french cleats. Not sure why the pics are upside down they are fine in my photos folder.