Pine Cupboard
Furnished content. (from Lumberjocks.com)
This was made to fill a space and improve the appearance. The door facing was made as a separate assembly and installed to suit after the cabinet was installed.
Read more here
posted at: 12:00am on 14-Oct-2021 path: /Woodworking | permalink | edit (requires password)
What's The Best Sharpening System?
Furnished content. (from Popularwoodworking.com)
In our latest video, we're comparing water stones, oil stones, and diamond stones. Get a basic overview, then learn the pros and cons of each sharpening method. Click here for more articles about sharpening.…Source
Read more here
posted at: 12:00am on 14-Oct-2021 path: /Woodworking | permalink | edit (requires password)
1930's Model A Roadster
Furnished content. (from Lumberjocks.com)
First attempt air something this complex and am relatively pleased and proud of my effort. Even managed to learn how to ebonise wood thanks to another LJ I'll definetly saddle up again having learnt so much especially in the wheel department.THANKS LJ's for the assistance…...Cheers Kerry
Read more here
posted at: 12:00am on 14-Oct-2021 path: /Woodworking | permalink | edit (requires password)
Router Slab Flattening Jig
Furnished content. (from Lumberjocks.com)
My new flattening jig came about when I bought this ball bearing CNC like set up a guy was selling down the street for 20-25 bucks. I knew immediately this would work well for slab flattening. I used a old 36'' wide standard door and cut it down to 60''. The router holding plate is 3/8'' plywood and screwed to the 4 sliding blocks. I cut a 2 1/2'' hole for the router bit.
I got to use some of my old bandsaw bearings for the sideways movement.They are held in place with a 3/8'' bolt and washer and I made 4 wood knobs and used a wood threader to tighten the bolts.
I screwed the bar guides to the bearing set up and slid them on the 7/8'' bar. This bar has no flex and with the unique bearings in the 4 blocks and the bandsaw bearings it slides around like butter. Up, down, sideways, even a circular motion can be achieved. The best part is only a hand sanding is needed after planing. Maybe because of the smoothness? I already did 5 slabs and have a few more to go. This jig is for a couple projects coming up. My old flattening jig which was all wood with wood sliding on wood worked fine but this one makes it look like a antique now and works much smoother. My total cost for this was 20-25 dolllars. Everything else was scraps or things I had on hand. Thanks for looking. I'll be glad to answer any questions.
Read more here
posted at: 12:00am on 14-Oct-2021 path: /Woodworking | permalink | edit (requires password)
No-Mistake Protractor
Furnished content. (from Popularwoodworking.com)
Tool: 5-in-1 Combination Protractor Shop Now Manufacturer: Starrett MSRP: $142 If walls were all exactly 90 degrees, installing cabinets and trim would be a lot easier. When it comes to installing trimwork-especially crown molding-it sure would be nice to …Source
Read more here
posted at: 12:00am on 14-Oct-2021 path: /Woodworking | permalink | edit (requires password)
Promoted by Feed Shark
|