How to mill exposed tenons for drawers with a Domino Joiner
Furnished content. (from Lumberjocks.com)
A dovetail alignment jig is used to transfer tails to pins in hand-cut dovetails. The same jig can be used to make dominoed drawers. Here are the basic steps:1 – Secure mating boards to jig (for 6mm dominoes, set depth to 28mm for 3/4” stock)—pretend no mortises in the image 2 – Plunge to mortise in tight setting 3 – Remove side; reset depth to 20mm and mortise face board (endgrain) again 4 – Dry fit 5 – Glue, clamp and check for square 6 – Six new jigs (bases) are ready. Fences will be added.Original use:
Read more here
posted at: 12:00am on 05-Mar-2021 path: /Woodworking | permalink | edit (requires password)
Planter Box on Wheels
Furnished content. (from Lumberjocks.com)
Have you ever wondered how to get your kids to eat more vegetables? If you get them involved in growing their own plants, they tend to take a much bigger interest in eating their leafy greens. But before planting, you need to get a planter and fill it with dirt. To save money, why not build your own DIY Planter Box on wheels? You could even have kids help you, just like we did with a school that our kids go to. Follow this simple plan that I've made with step-by-step instructions on how to build it.Check out my website for more info and pictures at TheDIYPlan.com
Read more here
posted at: 12:00am on 05-Mar-2021 path: /Woodworking | permalink | edit (requires password)
Power-Carved Side Table
Furnished content. (from Popularwoodworking.com)
Turn a log into a sculptural statement piece. PROJECT #2101 Skill Level: Intermediate Time: 4 days Cost: $200 Have you ever come upon the opportunity to get some logs either due to a downed tree on your …Source
Read more here
posted at: 12:00am on 05-Mar-2021 path: /Woodworking | permalink | edit (requires password)
Accent table with Padauk
Furnished content. (from Lumberjocks.com)
Padauk, padauk, padauk… a beautiful blood red-hued wood that I fell in love with years ago only to find that along with the beauty of its hue quickly ages quickly. I had collected some board feet of it and made a traditional mortise and tenon base construction with leftover rustic maple and added my signature router cut butterfly's on the tabletop. Conclusion: after doing trial finishes for UV protection- UV wins. I am satisfied with the construction and finish- so now I have her completed and let it patinaI have placed it in my art room where I add projects as they are finished-
Read more here
posted at: 12:00am on 05-Mar-2021 path: /Woodworking | permalink | edit (requires password)
Press Stock to Fence With Wheel Board
Furnished content. (from Popularwoodworking.com)
I use this inexpensive and easy-to-make jig to press a workpiece against the fence of a band saw, but it would also be useful on a table saw or router table. The design consists of some scrap wood, a furniture …Source
Read more here
posted at: 12:00am on 05-Mar-2021 path: /Woodworking | permalink | edit (requires password)
Promoted by Feed Shark
|