Out feed table for two saws
Furnished content. (from Lumberjocks.com)
Built a outfeed set up for my new saw and old. I'll add drawers and doors under it for storage and access to the dust collection.
Read more here
posted at: 12:00am on 22-Feb-2021 path: /Woodworking | permalink | edit (requires password)
Laundry Cart Wheels
Furnished content. (from Lumberjocks.com)
I was asked to make some wheels to replace the 4” wheels on this laundry cart because the 4” ones were too hard to push in the gravel. The wheels are 1” wide and 9” diameter with 8 holes to match the rear ones. They are made from mesquite and painted gloss black. I thought I had a close up of the wheels right after I turned them but I can't find it.The cart moves very easy in the gravel with 4 9” wheels!!Cheers, Jim
Read more here
posted at: 12:00am on 22-Feb-2021 path: /Woodworking | permalink | edit (requires password)
How To Make A Hot Glue Gun Stand - The Super Simple Way!
Furnished content. (from Lumberjocks.com)
Hello everyone.This little project helped me solve a problem. My hot glue gun kept tipping over every time I set it down. So, I looked on line at various designs and, well, quite frankly, I didn't want to spend that much time on making something that isn't that important to me. I needed something that I could make quickly and something that would do the job. This super simple, and I mean super simple, stand did the trick. Apart from the added time making the video , the whole thing can be made in about 5 minutes (assuming that you have some scrap wood and a way to drill the holes). Now, I realize that not everyone has the same glue gun that I do so yo may have to modify yours a bit.Nonetheless, I hope this was a help to you. Let me know what you think. And if you get a chance, watch the video. And do be sure to LIKE and SUBSCRIBE. Please leave a comment below the video.Thanks and take care.
Read more here
posted at: 12:00am on 22-Feb-2021 path: /Woodworking | permalink | edit (requires password)
Promoted by Feed Shark
|
|