The Woodshop Shed

Medium Sized lumber cart

Furnished content.
(from Lumberjocks.com)


Medium Sized lumber cartOverall dimensions are approximately 60”W x 17 1/2”D x 50”HI found this design on youtube: link below. The video has a link to a place where you can purchase the plans which I did.https://www.youtube.com/watch?v=SMMKFDCpiisThis is a good sized cart for my needs. It allows me to move my partial sheets out of the way and it doesn't take up excessive room itself.I built it according to the plans except I added extra 2×4 where the casters attach. Below is a link to the casters I usedhttps://www.amazon.com/gp/product/B08G1GWFLL/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Comments:
0 comments, click here to add the first

Mill Brass & Aluminum with a CNC Router

Furnished content.
(from Popularwoodworking.com)


Add a new dimension to your woodworking skills. With the right techniques and tooling your CNC router can mill brass and aluminum with dependability, accuracy and consistency. Milling these materials on a home shop CNC router isn't difficult, but milling …Source

Read more here

Comments:
0 comments, click here to add the first

My first rolling pins!

Furnished content.
(from Lumberjocks.com)


Gifts for upcoming birthdays. I saw some of these online and wanted to try them. It was also an excuse to get more experience on the lathe.These are made of maple, cherry, and walnut. They are 1.75” diameter in the middle, with a 4” taper at the ends to 1.25” on the ends. This leaves a 12” workable flat surface in the middle. I used sandpaper on a board to smooth it nice and flat in the middle, and work my taper smooth on the ends. I only sanded to 220 grit, as I read that you do not want to sand them too smooth, or they will not coat well with flour. I did finish with mineral oil, but no wax for the same reason.I am happy with the way they came out, but I am not a baker… I await the final verdict from the pastry chefs, and expect payment in treats so I can help with the evaluation! :-)

Comments:
0 comments, click here to add the first

1919 Ford Model T

Furnished content.
(from Lumberjocks.com)


Finishing up my Ford Model T, 1919. A lot of fun to build. I made the wheels, the headlights and the radiator on my CNC router.Phil

Comments:
0 comments, click here to add the first

New and Improved ISOtunes Headphones

Furnished content.
(from Popularwoodworking.com)


Tool: XTRA 2.0 Buy Now LINK Buy Now  Manufacturer: ISOtunes MSRP: $79.99 each Bluetooth Hearing Protection The ISOtunes family of hearing-protection headphones has grown by two recently, with the addition of the XTRA 2.0 and LINK. Like …Source

Read more here

Comments:
0 comments, click here to add the first