The Woodshop Shed

adventures in woodworking and home maintenance, from my shop in an oversized backyard shed

February 2020
Sun Mon Tue Wed Thu Fri Sat
           


Carved Wall Clock

Furnished content.
(from Lumberjocks.com)


Carved Wall ClockHi:This is my latest project, a wall-hanging clock.The carving is in 6/4” Cherry, but the wooden dowel pieces are out of various woods, chosen for color, texture and size. Mostly, though, I chose the sizes from the collection of dowels I had in my studio.I used a bandsaw to cut the disks (six different diameters) all to the same thickness. The disks were lightly sanded, and then glued to the carved clock face. Because I was applying glue to the dowels' end-grain, the disks adhered very quickly to the clock face, leaving little time for re-arranging.The cock mechanism is a straight forward quartz type, with a 3/4” stem. I chose a set of long hands to reach across the clock face.The finish is satin varathane which really brought out the color of the wood.Hope you enjoy what you see :-)



Read more here

posted at: 12:00am on 21-Feb-2020
path: /Woodworking | permalink | edit (requires password)

Comments:
0 comments, click here to add the first



Telescoping Ceiling Light Test Stand

Furnished content.
(from Lumberjocks.com)


Telescoping Ceiling Light Test StandI built two of these telescoping stands to test various ceiling light options in preparation for an upcoming kitchen remodel. Our kitchen is lit by two large four-tube fluorescent light boxes. I've hated those things for years, and we'd like to replace them with something more modern, but deciding how to replace them has been a struggle.Each stand has an overhead arm, to which I can attach a light, on a height-adjustable post that lets me move the arm up to the ceiling. It's not as good as actually installing the light, but it's pretty close. Having two stands lets us experiment with positioning and spacing.The stands are very simple, and this is one of the few projects I've worked on where I just winged itwith no real planning or SketchUp modeling. I built both stands from four 2” x 2 furring strip boards and plywood scraps. For the wiring, I used an old three-wire extension cord, electrical plugs, and cable staples.The base of each stand is an X formed by two 24 cross-lapped boards. I also cut a shallow recess on the top of one strip to create a pocket for the bottom of the fixed post. Four angled braces connect the post to the base.The fixed part of the post is 6' tall. The movable part is 4' tall. I created a sleeve on the movable part from three 12 long plywood strips. The sleeve fits loosely around the fixed post and lets me raise the stand to reach our 9' ceilings. To maintain the adjusted height, I use a spring clamp under the sleeve.The top arm is 16 long and is screwed onto the top of the movable post, with a shallow rabbet for alignment and an angle brace for support.For wiring, I stapled a length of extension cable up the movable post over the arm, with some excess at the arm end and a male plug on the post end.The first lights we tested were 6 retrofit LED wafer lights. To hold the lights, I cut holes in 12” by 12 plywood scraps (painted white to simulate the ceiling) and attached them to the arms with spacer blocks to allow room for the fixtures.From that test we learned that these wafer lights are very bright but spray light everywhere. The light on the countertops was dim, and the wide beam spread created considerable glare. So these lights were out. (I'll use them in an above-workbench light I plan to build later.)Next, we simulated recessed cans by attaching bulb bases to the stands and using narrow-flood PAR30 bulbs. These bulbs concentrate bright light on the countertops and will be great for task lighting. But, unless we cover the ceiling with them, they won't provide adequate ambient lighting for the room.That observation led to our final test (at least for now). Our current thinking is that we'll need strategically placed (aligned with the countertop edges) PAR30 cans for task lighting and two centrally positioned traditional flush-mount lights for ambient lighting.To try this test, I attached pancake electrical boxes to the stand arms. In the last of the six main project photos at the top of this posting we're testing a 20 diameter dome light with four 15 watt LED bulbs (each roughly equivalent to a 100 watt incandescent bulb) positioned as high as possible under one of our existing fluorescent fixtures. (By the way, this light weighs 10 pounds, and that's as heavy as I would risk with these stands. The stand is on the verge of tipping over.) It produces a lot of usable light, and we now think our plan will work. We even think three-bulb fixtures will suffice.These tests will give us more confidence when we discuss lighting with our contractor and his electrician because we'll come in from a much more informed perspective.This project will eventually be a throwaway for me. But, if I worked for a lighting or electrical shop, I'd build a bunch of fancier versions of them for testing and demonstrations. They'd have folding bases, interchangeable light arms for various light types, and integrated height locks (threaded rods with star handles in the movable posts riding in long slots in the fixed posts, etc.).I'm straying off the topic of woodworking, but I decided to post this project in case it helps anyone else struggling with lighting design. To that end, I'd also like to provide the following links, which provide the most useful lighting information I found on the web. Instead of the general “space your recessed lights in a grid” advice most articles contain, these go into detail about bulb types and discuss actual measurements and specific design principles.

Thanks for reading!


Read more here

posted at: 12:00am on 21-Feb-2020
path: /Woodworking | permalink | edit (requires password)

Comments:
0 comments, click here to add the first



Yarn Bowl

Furnished content.
(from Lumberjocks.com)


Yarn BowlThis is another mesquite yarn bowl that has turquoise inlay and fractal burned figures. It is 6” high and 5 1/2” outside diameter.It is finished with wipe on poly.Cheers, JimI also finished a sign for our new granddaugher to be in April…Mylah It is cut out of 3/16 plywood and painted with white .



Read more here

posted at: 12:00am on 21-Feb-2020
path: /Woodworking | permalink | edit (requires password)

Comments:
0 comments, click here to add the first



February 2020
Sun Mon Tue Wed Thu Fri Sat
           


Promoted by Feed Shark





RSS (site)  RSS (path)

ATOM (site)  ATOM (path)

Categories
 - blog home

 - Announcements  (0)
 - Annoyances  (0)
 - For_Sale  (0)
 - Home_and_Garden  (1)
 - Humor  (0)
 - Industry_News  (0)
 - Massachusetts_USA  (0)
     - Swansea  (0)
 - Notices  (0)
 - Observations  (0)
 - Oddities  (0)
 - Privacy  (1)
 - Reading  (0)
     - Books  (0)
     - Ebooks  (0)
     - Magazines  (0)
     - Online_Articles  (0)
 - Reviews  (1)
 - Rhode_Island_USA  (0)
     - Providence  (0)
 - Shop  (0)
     - Planes  (1)
 - Shop_Improvements  (2)
 - Woodworking  (6876)
     - Calculator  (1)
     - Projects  (2)
     - Resources  (3)
     - Techniques  (179)
     - Tips  (0)
     - Videos  (7)


Archives
 -2024  March  (13)
 -2024  February  (15)
 -2024  January  (22)
 -2022  October  (2)
 -2022  September  (86)
 -2022  August  (116)
 -2022  July  (112)
 -2022  June  (117)
 -2022  May  (122)
 -2022  April  (128)
 -2022  March  (140)
 -2022  February  (122)
 -2022  January  (126)
 -2021  December  (132)


My Sites

 - Millennium3Publishing.com

 - SponsorWorks.net

 - ListBug.com

 - TextEx.net

 - FindAdsHere.com

 - VisitLater.com