Round Pedestal Dining Table
Furnished content. (from Lumberjocks.com)
This was my first round table commission. My client requested a similar design to a table she saw in a popular furniture magazines catalogue but with a larger table size (60). We recreated the base and resized the top to her specs, she wanted poplar as she liked the color variations.The base features two large castle joints at the bottom and top of the center pillar. The diagonal supports are joined to the rest of the structure by 8mm domino tenons.The top is 1.75 thick and was cut to size using a 1/2 upcut spiral on a router and a 1-1/2 flush trim bit. We used steel c-channel to ensure this thing stays flat, held in by 3/8 threaded inserts and bolts (3 per 48 bar, of which there are two). We used a Minwax oil-base Silvered Gray stain followed up with a vinyl sealer and conversion varnish.Needless to say I just delivered this table a week ago and I already have 2 more clients lined up for the same thing.
Read more here
posted at: 12:00am on 28-Nov-2020 path: /Woodworking | permalink | edit (requires password)
Spalted maple table
Furnished content. (from Lumberjocks.com)
This is a nice little dining table of spalted maple and eastern walnut, custom made for a couple in Kentucky it was finished with a hand rubbed linseed oil and beeswax .40x60
Read more here
posted at: 12:00am on 28-Nov-2020 path: /Woodworking | permalink | edit (requires password)
Ash Blanket Chest
Furnished content. (from Lumberjocks.com)
Frame and Raised Panel design, Lid has Bread Board ends. Lumber is Ash. There is a Aromatic Red Cedar floor. The small “Stash Box” on the end also serves as a prop for the lid. Lid is 28-1/2” long, by 17” wide, by 3/4” thick.Chest stands from the floor to the top of the lid at 24”. Stain is called Early American by Minwax, There is a coat of clear gloss poly, and coat of that stain as a glaze, then a second coat of the varnish. Black handle on each end.Brass “Piano” hinge. Under the 1/4” Cedar planks, there is a 1/4” plywood panel, glued and screwed to 1×2 cleatsMade as a Christmas Present for my Grandson's “Better Half”....hope she will like it…
Read more here
posted at: 12:00am on 28-Nov-2020 path: /Woodworking | permalink | edit (requires password)
Promoted by Feed Shark
|
|