Wanted a good outdoor chair for me and the wife. Made with treated pine and all the hardware is stainless to keep the rust away here on the Gulf Coast. Hope you enjoy, PS. Sorry about the sideway picture. I don't know why it is turned.
1) The dust hood behind the Spindle Sander works well in tandem with the provided collection point. However, after loosing a few wood pieces and a brush down the 4” duct I decided to do something about it. The 1/2” hardware cloth does the trick, and the three sided frame makes it very easy – especially on the fingers- to remove and replace.2) The dust hood behind the miter saw works very well with the arrangement shown in pictures 5 & 6.. It works even better after the 2 1/2” hose drop was replaced with a 4” hose.