Whistle and Rings
Furnished content. (from Lumberjocks.com)
We were given a piece of hollow African Blackwood, at our wood turning guild , and a challenge for next month to see what we could make out of it. It was a little over 1” in diameter and about 9” long. I drilled it out to 5/8 and glued in a dowel and made a whistle out of it for my great granddaughter. I used a flat piece of African Blackwood for the cap and piece of cherry for the mouthpiece. It works but the three notes are not as good as they should be. I need to learn more about whistle making.The whistle is 6 1/2” long and the 3 1/4” holes are 3 1/2”, 4 1/2” and 5 1/2” deep. It is finished with EEE and ShellawaxI had a piece left over so I turned 6 rings of various sizes from it. They are also finished with EEE and Shellawax.Cheers, Jim
Read more here
posted at: 12:00am on 01-Sep-2019 path: /Woodworking | permalink | edit (requires password)
Two Axis Turned Maple Winged Bowl
Furnished content. (from Lumberjocks.com)
This is a last piece of the branch from my daughter's tree. I turned it in the style of Rudy Lopez. All the sanding had to be done off the lathe. It is maple and finished with Danish oil and 3 stage buffed and waxed.Cheers, JimHere is a link to how I did it. https://www.lumberjocks.com/topics/305989
Read more here
posted at: 12:00am on 01-Sep-2019 path: /Woodworking | permalink | edit (requires password)
Forest Fossils
Furnished content. (from Lumberjocks.com)
Butternut Burl standing 54 inches tall and 3 inches thick at the base and 1.75 at the edges near the Ammonite terabyte wood burned on one side and a fish on the other near the bottom. The Ammonite took a month to program and put into the cnc . I worked with a young man on on the cnc Did 4 prototypes on mdf to get the position we wanted .C and C welcome
Read more here
posted at: 12:00am on 01-Sep-2019 path: /Woodworking | permalink | edit (requires password)
Promoted by Feed Shark
|
|