The Woodshop Shed

adventures in woodworking and home maintenance, from my shop in an oversized backyard shed

July 2019
Sun Mon Tue Wed Thu Fri Sat
 
     


Oh My Stars! (Or are they snowflakes?)

Furnished content.
(from Lumberjocks.com)


Oh My Stars! (Or are they snowflakes?)Good Day LJs,Its time to replenish my fall craft show inventory, so I decided to explore the world of snowflakes.I used soft maple and Spanish cedar leftover from a previous project. I built a small sled to cut the 6 parallelogram sticks from the wide stock at 30 degrees, checking the sawblade angle frequently with a digital angle guide (Wixey).For the decorative cuts on each stick, I set the tablesaw blade to various depths and distances away from the fence. I glued the sticks together, alternating the maple and cedar to make a long 6-point blank.In previous builds, I had used the miter saw to cut the flakes from the blank, but was losing a lot of product due to the saw blade's width.I finally figured out how to “safely” use my bandsaw to slice them, using a 1/4” thick plywood base to make a zero-clearance base for the bandsaw blade. This way the flakes slide though on a solid surface and do not get jammed in the gap surrounding the blade as the blank is pushed through using 2×4 push blocks.All told, about 200 snowflakes were born in a long afternoon, but it was well worth the time and effort.



Read more here

posted at: 12:01am on 16-Jul-2019
path: /Woodworking | permalink | edit (requires password)

Comments:
0 comments, click here to add the first



Trivet

Furnished content.
(from Lumberjocks.com)


TrivetMade from scrap pieces and some wine corks that I had around



Read more here

posted at: 12:01am on 16-Jul-2019
path: /Woodworking | permalink | edit (requires password)

Comments:
0 comments, click here to add the first



More Chisel Boxes with Box Joints

Furnished content.
(from Lumberjocks.com)


More Chisel Boxes with Box JointsLast of my recent chisel boxes with handcut finger/box joints. I made all three at the same time. These are all poplar sides with plywood bottoms and lids and poplar inserts. I've tried to make them all visually different with stains so that I can easily tell them apart. They have three different kinds of specialty chisels.I decided to stick with the upside down hasps that I put on the first two chisel boxes. It seems to work for me.The smallest is for some Narex dovetail chisels and two fishtail chisels I ground down from full size chisels. Its finished with a wipe on mix of tung oil, b.l.o. and poly then finished with clear shellac and wax.
The light colored larger box is for the Narex skew chisels (I use these SO much when cutting and cleaning up dovetails).
The finish is another wipe on blend of Provencial stain, mineral spirits and poly followed by clear shellac and wax.
The last is for the Narex mortise chisels I bought last year. It has a wipe on mix of jacobean/ebony mix stain, mineral spirits and poly followed by amber shellac and wax.
The last six or seven boxes I've made have been tool cases for chisels and planes that have been rattliing around loose in drawers of my bench or in cardboard boxes. Making custom tool cases feels like killing two birds with one stone… cool box and a cool place to keep your tools. It also felt a little like a break from the decorative box series I started a couple of months ago. I am ready to get back to dovetails and miters with splines and maybe get a little more creative. Still… I'll probably have these boxes for many years to come so its time well spent.Big Thanks to LittleBlackDuck for the tips on making chisel booties. I was buying those silicon guards online and he suggested Plastidip and paper tape. I had to watch a youtube video to really get it but I made soooo many chisel guards and I still have half a can of the Plastidip left. Thanks LBD.Guess you've figured out that I like Narex chisels. Its hard for me to compare them to anything but the beater chisels I've had but after flattening the backs (not much work) and sharpening, they work great and keep an edge. I do strop often while using but I hardly have to mess with the primary bevels. First two sets I bought (not any of these) I reground the bevels to 20 degrees on one set and 35 degrees on the other. The 20's are for chopping dovetails in softwood and the 35's are for hardwood.Narex is affordable and seems to offer great quality.
Thanks for looking.
Jon



Read more here

posted at: 12:01am on 16-Jul-2019
path: /Woodworking | permalink | edit (requires password)

Comments:
0 comments, click here to add the first



July 2019
Sun Mon Tue Wed Thu Fri Sat
 
     


Promoted by Feed Shark





RSS (site)  RSS (path)

ATOM (site)  ATOM (path)

Categories
 - blog home

 - Announcements  (0)
 - Annoyances  (0)
 - For_Sale  (0)
 - Home_and_Garden  (1)
 - Humor  (0)
 - Industry_News  (0)
 - Massachusetts_USA  (0)
     - Swansea  (0)
 - Notices  (0)
 - Observations  (0)
 - Oddities  (0)
 - Privacy  (1)
 - Reading  (0)
     - Books  (0)
     - Ebooks  (0)
     - Magazines  (0)
     - Online_Articles  (0)
 - Reviews  (1)
 - Rhode_Island_USA  (0)
     - Providence  (0)
 - Shop  (0)
     - Planes  (1)
 - Shop_Improvements  (2)
 - Woodworking  (6877)
     - Calculator  (1)
     - Projects  (2)
     - Resources  (3)
     - Techniques  (179)
     - Tips  (0)
     - Videos  (7)


Archives
 -2024  March  (14)
 -2024  February  (15)
 -2024  January  (22)
 -2022  October  (2)
 -2022  September  (86)
 -2022  August  (116)
 -2022  July  (112)
 -2022  June  (117)
 -2022  May  (122)
 -2022  April  (128)
 -2022  March  (140)
 -2022  February  (122)
 -2022  January  (126)
 -2021  December  (132)


My Sites

 - Millennium3Publishing.com

 - SponsorWorks.net

 - ListBug.com

 - TextEx.net

 - FindAdsHere.com

 - VisitLater.com